The decoration of the kitchen and bathroom of modern families generally uses ceramic tiles or some stone materials, which are not only simple and generous but also can make reasonable use of the only space to make storage cabinets on the inner wall. However, judging from the current technical level of the decoration industry, after a period of use, ceramic tiles and stones will loosen and fall off. The main technical reason is that the viscosity of the cement mortar is not enough. In addition, the kitchen is often eroded by greasy and water rust, while the bathroom is exposed to water rust and soap scale for a long time in a humid environment, and its tiles and stones are prone to yellowing. In order to keep the porcelain surface clean without damaging the gloss of the porcelain surface, you can use a multifunctional decontamination paste to clean it.
As for the crevices of the tiles, first, use a brush with a little decontamination cream to remove the dirt, and then apply a waterproofing agent to the crevices. This will not only prevent water seepage but also prevent mold growth. It is worth mentioning that the current large amounts of cleaning and disinfecting agents used in households all contain chemical substances such as acid and alkali that have a great impact on natural stone, which has an unfavorable reaction to the surface color and internal mineral composition of the stone. What’s more serious is that most cleaning agents must react on the surface of the stone for at least five minutes to be effective. However, the cleaning agent is already destroying the stone during this time, so the surface of the bathroom stone should be cleaned with a neutral pH. detergent.
Acidic cleaners can remove lime, cement stains, limescale, and stubborn urine stains, and oxidized metal stains on the surface of cleaning objects, such as acidified cleaners. Alkaline cleaners can remove all kinds of animal and vegetable grease stains and mechanical oil stains, and can remove the wax layer on the ground. Such as special enhanced oil cleaning agent; strong wax water etc. If the acid-alkaline cleaner is used improperly, in addition to the waste of the cleaner, it will also damage the surface of the cleaner to varying degrees, and may even cause damage to the user’s skin or eyes.
Pay attention to the following points when using acid and alkaline cleaners:
1. To be clear about its use and contraindications, you should read the instruction manual carefully before use, or consult the supplier in detail to obtain the user guide.
2. Before use, do a small sample experiment in an inconspicuous place, and use it according to a clear dilution ratio to dilute the cleaning solvent under the premise of confirming that it will not cause damage to the cleaning material. Wear work gloves and wear eye masks when necessary.
3. Avoid contact with the cleanser on the skin or eyes. The cleanser should not stay on the surface of the cleansing material for too long. Use clean water after use.
4. It cannot be used on the surface of objects that are sensitive to acid and alkali. For example, certain cleaning agents have a destructive effect on the surface of marble, glass, metal, and so on.
Before use, you should do a small sample experiment in an inconspicuous place, and use it to dilute the cleaning solvent according to the true dilution ratio under the premise of confirming that it will not cause damage to the cleaning product. Wear work gloves when working, and wear eye masks if necessary. Avoid contact with the cleanser on the skin or eyes. The cleanser should not stay on the surface of the cleansing material for too long. Use clean water after use.